Galvanized Malleable Iron Pipe Fitting Tee 130 — real shop-floor notes and specs
When I spec a galvanized pipe tee for maintenance crews, I’m balancing standards, lead times, and the gritty reality of thread fit on old lines. This Tee 130 from Shijiazhuang’s malleable iron zone has been showing up on projects from boiler rooms to farm irrigation—surprisingly versatile, and, to be honest, not fussy to install.
Product name: Galvanized Malleable Iron Pipe Fitting Tee 130. Origin: Malleable Iron Zone, Shijiazhuang, Hebei, China. The metallurgy: black heart malleable iron (ISO 5922 / ANSI/ASME A197 / DIN 1692). Threads cut to ISO 7/1 and ANSI/ASME B1.20.1 (so, yes, BSPT and NPT options). Surface is hot-dipped galvanized; black finish optional if you’re painting or heat-wrapping.
Quick spec sheet
| Size range | 1/4” – 6” (ISO 49 / ASME B16.3 / DIN 2950) |
| Threads | ISO 7/1 (BSPT), ASME B1.20.1 (NPT), DIN 2999 |
| Tensile strength | ≥33 kg/mm² |
| Elongation | ≥8% |
| Hardness | ＜HB150 |
| Test / working pressure | 2.5 MPa test; 1.6 MPa working |
| Body shapes | Banded, beaded, plain |
| Certifications | ISO 9001, CIQ, ITS, SGS, BV, CCIC |
Process flow (what actually happens)
- Material: black heart malleable iron cast per A197, heat-treated for ductility.
- Precision casting and trimming; banded/beaded/plain contour per drawing.
- Threading: BSPT or NPT; ring gauge inspection to ISO 7/1 or ASME B1.20.1.
- Hot-dip galvanizing: zinc coating per ASTM A153-like practice, thickness ≈45–70 µm (real-world may vary).
- Pressure test: hydrostatic at 2.5 MPa; random sample air underwater for bubbles.
- Marking, QC stamps (lot traceability), export carton + palletization.
Service life: ≈15–30 years in treated water; oil/air lines similar; steam and coastal gas lines trend lower due to cyclic thermal/zinc attack—your mileage may vary.
Where it gets used
Water distribution (municipal retrofits), heating loops, compressed air skids, light oil transfer, low-pressure steam, and general gas manifolds. Many customers say the galvanized pipe tee threads bite cleanly into legacy BSP runs, which, actually, saves rework on old buildings.
Vendor snapshot (why sourcing matters)
| Vendor | Standards fit | Zinc coat | Lead time | Customization |
|---|---|---|---|---|
| SZ Pipe Fitting (Shijiazhuang) | ISO 49, ASME B16.3, DIN 2950; BSPT/NPT | ≈45–70 µm | ≈15–30 days ARO | Shapes, logo, cartons, threads |
| Importer A (generic) | Mixed; often ISO 7/1 only | ≈30–50 µm | Stock-dependent | Limited (carton only) |
| Local stockist B | ASME B16.3; NPT focus | ≈40–60 µm | Same-week (premium) | Minimal |
Customization, packing, logistics
- Threads: BSPT or NPT; mixed pallets possible.
- Finishes: hot-dip galvanized or black, banded/beaded/plain.
- Packing: export cartons; pallets on request; double woven bags available.
- Lead time: within 30 days after deposit (I’ve seen 18 days on rush runs).
Mini case study
A mid-size brewery swapped legacy tees on a CO2 and compressed air manifold. Result: zero leak failures at 1.2 MPa after 72‑hour soak; thread sealant consumption dropped ≈12% because the galvanized pipe tee threads gauged tighter. Maintenance techs liked the banded style—easy wrench grip in tight racks.
Market trend (quick take)
Even with stainless stealing headlines, malleable iron tees hold ground in retrofit and cost-sensitive builds. The hybrid approach—stainless where it counts, galvanized pipe tee elsewhere—is, I guess, the pragmatic default for 2025 budgets.
References
- ISO 49: Malleable cast iron fittings.
- ASME B16.3: Malleable iron threaded fittings.
- ISO 7-1: Pipe threads where pressure-tight joints are made on the threads (BSPT).
- ASME B1.20.1: Pipe Threads, General Purpose (NPT).
- ASTM A153: Zinc Coating (Hot-Dip) on Iron and Steel Hardware.
- ISO 9001: Quality Management Systems—Requirements.
HEBEI GAIN TRADING CO.,LTD” is the subcomany of Hebei Wanda Malleable Iron Corp.,Ltd ,which was established in 1997.steel pipes We are leading & professional exporter & supplier of the registered “SZ” Brand malleable iron pipe fittings, our products can be used in various pipelines to convey gas,water,oil and so on.cast iron pipe It is of rich assotrments:banded,beaded,plain;galvanized and black;heavy type and light type.Size is from 1/4 to 6 inch.Standard:BS Standard,DIN Standard,American standard.galvanised steel pipe suppliers The company has acquired ISO9001, ISO14001 and OHSAS18001, certifications of UL and FM of America , CE of the EU , ABNT of Brazil , TSE of Turkey China Compulsory Certification and other certificates and honors, “Hebei Creditable Enterprise” since 1996 ,”Hebei province High-integrity Enterprise”since 2008, “the Famous Product in Hebei province” since 1996 ,”Famous Brand of Malleable Iron Pipe Fittings in China”since 2013, “China Well-known Trademark” in 2014.super blog